Ecosoft FPA 1252 Whole House Backwashing Carbon Filter

$2,600.00 excl. GST

  • Ecosoft FPA 1252: a 12 x 52 inch tank holding 25 kg of granular activated carbon, with a pre-programmed Clack CT control valve that backwashes the carbon automatically.
  • Reduces colour, taste and smell in tank water, including the yellow or brown water and smell that often come from asphalt shingle and bitumen roofs.
  • Also reduces chlorine taste and smell in town water.
  • Supply only. We quote installation after a free onsite visit, and we service it every 12 months.
  • Pick up only from our shop at 2 Mill Lane, Warkworth. We don’t courier this filter.
SKU: ECO-FPA1252CT Categories: ,

A whole house carbon filter that cleans itself

The Ecosoft FPA 1252 is the backwashing carbon filter we fit most often when tank water has a colour, taste or smell problem. Most of these jobs are homes with an asphalt shingle or bitumen roof, where the water comes out yellow or brown and smells. The activated carbon soaks up the compounds that cause it. On a timer, the Clack control valve on top runs water backwards through the tank to flush out trapped dirt and loosen the carbon, so it keeps working between services.

What it helps with

  • Yellow, brown or tea-coloured tank water, and the taste and smell that come with it.
  • Water from asphalt shingle, bitumen and torch-on roofs. See our guide to roof materials and tank water.
  • Tannins and other organic colour.
  • Chlorine taste and smell in town water.

What it doesn't do

  • It doesn't kill bacteria, viruses or protozoa. Tank and bore water still need a UV water filter after the carbon.
  • It isn't a softener, and it won't fix hard water, iron or acidic water on its own.
  • It won't fix a dirty tank. If there's sludge in the tank, get it cleaned first.

What it needs

  • A sediment filter before it. Ecosoft rates the pre-filter at 100 micron.
  • A firm, level base and a seismic restraint.
  • A power point for the control valve.
  • A drain for the backwash water. Each backwash uses 400 to 800 litres, the data sheet says, so on tank water we set it to backwash only as often as your water needs.
  • A dry, sheltered spot such as a shed or garage, out of the weather and direct sunlight.
  • A pump that can supply about 29 litres a minute during the backwash. We check this at the site visit.

The full figures are in the Specifications tab, and the data sheet and instruction manual are in the Download documents tab.

Supply only, installed by quote

We sell this filter supply only, for pick up from our shop at 2 Mill Lane, Warkworth. Most customers have us install it. We'll come out for a free onsite visit, look at where it can go, the drain, the power and your pump, then give you a quote for the full install. Call us on 0800 278 296 or book a free onsite visit.

Looking after it

The carbon gets used up over time, so we replace it about once a year. Ecosoft's manual advises servicing these filters at least once a year, or twice a year if the water has a lot of iron. We service them every 12 months, along with your UV and cartridges, and remind you when it's due. See water filter servicing.

Specifications

Brand Ecosoft
Model FPA 1252 CT (ECO-FPA1252CT)
Filter media 25 kg FILTR300 granular activated carbon
Control valve Clack CT, pre-programmed. Backwashes every 1 to 99 days, or on the days of the week you choose.
Tank size 12 x 52 inch. 310 mm wide x 1,533 mm high including the valve.
Inlet / outlet 1 inch
Operating flow rate About 14.2 L/min
Pressure drop 0.5 to 1 bar in service
Inlet pressure 2 to 6 bar
Backwash 15 to 30 minutes at 28.8 L/min
Water used per backwash 400 to 800 L
Water temperature 4 to 30°C
Where it goes Indoors or sheltered, out of the weather and direct sunlight, 5 to 40°C
Power 230 V, 50 Hz, 30 W (12 V plug-in adapter)
Pre-filter 100 micron

From the Ecosoft FPA 1252 data sheet and the Ecosoft media systems instruction manual.