Viqua Pro10 UV Replacement Lamp – Model 602854
Genuine Amalgam UV Lamp for Pro10, G, and G+ Systems
$263.67 excl. GST
- High-output amalgam UV-C for strong, stable disinfection at rated flows
- 12-month / ~9,000-hour service life — replace annually to maintain dose
- NSF/ANSI 55 Class A performance when installed in a certified Pro10 system
- Installs into existing Viqua Pro10 housing; no system modifications required
- Works best with pre filtered water (rainwater tanks, bores, springs, surface supplies)
- Ideal for residential, small commercial, and light industrial sites
Replace the lamp every 12 months even if it still glows, reset the controller, and avoid touching the glass during installation.
Viqua Pro10 UV replacement lamp – Model 602854
- Product name & model: Viqua Pro10 UV replacement lamp — 602854
- Compatibility: Viqua Pro10 UV system (confirm model label before purchase)
- Lamp type / wavelength: High-output amalgam UV-C, 254 nm
- Rated service life: 12 months (~9,000 hours)
- Certification: NSF/ANSI 55 Class A (when installed in the certified Pro10 system)
- Electrical/ballast: Driven by Pro10 electronic ballast; system input 230–240 V AC, 50 Hz (NZ)
- Operating conditions: Clear, prefiltered water; recommended pre-filter 5 µm; observe UVT/iron/tannin limits
- What’s included: Lamp only (quartz sleeve and O-rings sold separately)
- Maintenance: Replace annually; reset controller after change; handle glass with gloves
- Safety & disposal: Contains a small amount of mercury — recycle per NZ e-waste guidance
What is NSF/ANSI 55 Class A?
NSF/ANSI 55 Class A is an internationally recognized certification for UV water disinfection systems, ensuring they meet strict performance and safety requirements for treating microbiologically unsafe water.
Here’s what it means:
NSF International is an independent health and safety organisation that tests and certifies products to protect public health.
ANSI, the American National Standards Institute, oversees U.S. product standards and ensures they’re scientifically valid.
Class A UV systems are tested to deliver a minimum UV dose of 40 mJ/cm², a level proven effective at neutralizing bacteria, viruses, and protozoa like Giardia and Cryptosporidium.
Why this matters for your Viqua Pro10 system:
The Pro10 UV system, when equipped with this certified lamp, is capable of delivering safe, clean drinking water—even from untreated sources like rainwater tanks or bore supplies.
NSF/ANSI 55 Class A certification means your system includes critical safety features, such as lamp failure alerts and automatic shut-off if UV levels drop below safe thresholds.
Only genuine Viqua lamps ensure the system continues to meet certification standards and deliver full pathogen protection.
Protect your water. Choose genuine Viqua replacements.
UV lamps degrade over time, reducing disinfection performance even if the light is still on. Replacing your lamp every 12 months is essential to keep your system working as intended.
Don’t compromise on water safety. Replace your Viqua Pro10 UV lamp annually with a certified, genuine part—trusted for clean, safe water all year round.
