Select Page
Sale!

DAB Divertron 900 Submersible Pump (900A / 900X)

DAB Divertron Submersible Pressure Pump

Price range: $1,698.00 through $1,929.00 excl. GST

  • All-in-one automatic control: built-in pressure/flow controller for plug-and-play use.
  • Strong, consistent pressure: up to 45 m head and ~90 L/min for homes & irrigation.
  • Dry-run protection plus integrated non-return valve for long life and reliability.
  • Rainwater-tank ready: 900A (float switch) or 900X (floating suction); 15 m lead for easy.

The DAB Divertron 900 operates quietly underwater and features corrosion-resistant components for extended longevity in rainwater tanks. With the controller built in, there’s less to buy and wire. The 15m plug-in lead speeds up installations, and the 900X floating suction draws cleaner water for taps and irrigation. For an even smoother system, pair it with a small pressure tank—backed by local advice and support from Aqua Works, Warkworth.

Submersible pressure pump automation for NZ homes — smart pressure/flow control

Plug-and-play automatic control — The Divertron 900’s built-in pressure/flow controller starts the pump when a tap opens and stops it when closed. No separate controller, wiring, or pressure switch needed. It also integrates a check valve and dry-run shutoff, then auto-resets when water returns. Pre-set from factory—works with filters, hose guns, and irrigation timers—so installs are faster, neater, and less prone to nuisance cycling.

DAB Divertron 900 multi-impeller design — Better flow through filters & valves

Strong, consistent pressure — up to 45 m head and ~90 L/min — provides confident showers and steady flow to kitchens, laundry, and irrigation. Suitable for small NZ homes: 1–2 bathrooms, 2–3 outlets at once, or one garden zone (e.g., 3–6 pop-ups, depending on nozzle capacity). Multi-impeller design smooths pressure, preventing surging at hose guns and mixers. Allow for pipe length and elevation from the tank when determining the size.

Smart self-protecting submersible pump — Auto stop/reset & thermal guard

Built-in protection — Dry-run safety stops the pump when the tank runs low, preventing overheating and seal damage. The controller auto-resets once water returns. An integrated non-return (check) valve holds prime and reduces water hammer, allowing for instant restarts. Electronic monitoring limits rapid cycling, and a thermal cut-out safeguards the motor—delivering longer pump life, fewer callouts, and dependable, everyday operation. Rated IP68 with class-F motor; anti-debris sand filter helps reliability.

DAB Divertron 900 rainwater tank pump (NZ) - 900A with float switch, 900X for floating suction - your choice

Rainwater-tank ready — Choose 900A with plug-in float to stop on low water, or 900X to add a floating suction for cleaner pickup. Its 15 m power lead simplifies installations in tanks. Suits rainwater supply—toilets, laundry, kitchen (with filtration/UV as required), garden taps and an irrigation zone—and whole-home pressure boosting from tanks when correctly sized and set up with a compliant mains top-up. Ideal for NZ homes and retrofits.

Give Steve at Aqua Works a call at 0800 278 296, and our experts will guide you to the best water solution.

 

Built tough for NZ water tanks - Low-maintenance, corrosion-resistant design

Durable, quiet & efficient — Built from anti-corrosive technopolymer with stainless-steel internals, the DAB Divertron 900 is IP68-rated for continuous submersion and engineered with a class-F motor for long life. Its underwater design runs quietly and sips power while maintaining steady pressure. Ideal for residential and rural tanks and light commercial wash down/irrigation—a tough, low-maintenance submersible that keeps water moving without the noise.

 

Rainwater harvesting in NZ — from storage tanks to toilets, laundry, kitchen

Typical use cases in NZ homes & sites — Ideal for rainwater harvesting from above-ground or buried tanks, supplying toilets, laundry, kitchen (with treatment) and a single garden irrigation zone; also for pressure boosting from cisterns or storage tanks. Use only clean, non-abrasive water at temperatures between 0 °C and 40 °C. Install vertically. Maximum immersion depth is 12 m. The pump starts at >2 L/min or at ~2.4 bar cut-in, making it well-suited to everyday on-demand supply.

Not sure if the DAB Divertron 900A/X Submersible Pump is the right fit for your water system?

Give Steve at Aqua Works a call on 0800 278 296  he’s got the knowledge and experience to help you find the perfect pump for your home, farm, or irrigation setup!

Steve's Pro's and Con's

Steve’s DAB Divertron 900A/X Submersible Pro’s:

One of the standout advantages of the DAB Divertron 900A/X is its whisper-quiet operation, making it an excellent choice for residential and rural applications where noise levels matter. Unlike traditional external pumps that require a pump box, this fully submersible pump integrates directly into rainwater tanks and wells, keeping your setup tidy and aesthetically pleasing.

Steve’s DAB Divertron 900A/X Submersible Con’s:

Despite its many benefits, there are a few things to consider. Because the Divertron 900A/X is fully submersible, any maintenance or servicing requires pulling it from the water system rather than simply accessing a pump box. But don’t worry, Aqua Works specializes in water pumps and knows these systems inside and out. If you ever need advice or assistance, give Steve a call at 0800 278 296, as he’s always happy to help keep your water flowing smoothly!

Specifications

DAB Divertron 900A — Specifications

Type: Multi-impeller submersible pump with built-in auto start/stop electronics and external float switch (low-water shutoff).

Max head: up to 45 m.

Max flow: up to ~5.4 m³/h (≈90 L/min) per DAB site (see TS curves).

Power (P2/P1): 0.56 kW (0.75 HP) / 0.92 kW; Single-phase 220–240 V, 50 Hz; 4.2 A; 12.5 µF capacitor.

Starts: max 20/hour.

Outlet: 1″ BSP (G1) female, supplied with multi-section reducer.

Cable: 15 m H07RN-F with plug.

Protection: IP68, motor Class F; dry-run protection, integrated non-return valve, sand filter.

Construction: Technopolymer body/impellers; stainless-steel shaft/strainer elements.

Operating limits: Clean water, 0–40 °C; max immersion 12 m; vertical install.

Dimensions (pump body): Ø 160 mm × 536 mm height; pack weight ~11 kg.

DAB Divertron 900X — Specifications

Type: Multi-impeller submersible pump with built-in auto start/stop electronics and brass inlet insert for floating suction kit (draws cleaner surface water).

Max head: up to 45 m

Max flow: up to ~5.4 m³/h (≈90 L/min) per DAB site (see TS curves).

Power (P2/P1): 0.56 kW (0.75 HP) / 0.92 kW; Single-phase 220–240 V, 50 Hz; 4.2 A; 12.5 µF capacitor.

Starts: max 20/hour.

Outlet: 1″ BSP (G1) female, supplied with multi-section reducer.

Cable: 15 m H07RN-F with plug.

Protection: IP68, motor Class F; dry-run protection, integrated non-return valve, sand filter

Construction: Technopolymer body/impellers; stainless-steel shaft/strainer elements.

Operating limits: Clean water, 0–40 °C; max immersion 12 m; vertical install.

Dimensions (pump body): Ø 160 mm × 536 mm height; pack weight ~11 kg.

Note: Some DAB pages list max flow to 5.4 m³/h while the technical sheet curves extend to 6.0 m³/h; we present the conservative site figure and link curves for context. For NZ installs, Aqua Works can size the right model and suction kit for your tank and pipe run.

Download Documents