Viqua Pro20 UV Replacement Lamp – Model 602855
Genuine UV Lamp for Viqua Pro20, H, and H+ Systems
$340.19 excl. GST
- High-output amalgam UV-C for strong, stable disinfection at rated flows
- 12-month / ~9,000-hour service life — replace annually to maintain dose
- NSF/ANSI 55 Class A performance when installed in a certified Pro20 system
- Installs into existing Viqua Pro20 housing; no system modifications required
- Works best with pre-filtered water (rainwater tanks, bores, springs, surface supplies)
- Ideal for residential, small commercial, and light industrial sites
Replace the lamp every 12 months even if it still glows, reset the controller, and avoid touching the glass during installation.
Viqua Pro20 UV Replacement Lamp – Model 602855
Product name & model: Viqua Pro20 UV replacement lamp — 602855
Compatibility: Viqua Pro20 UV system (confirm model label before purchase)
Lamp type / wavelength: High-output amalgam UV-C, 254 nm
Rated service life: 12 months (~9,000 hours)
Certification: NSF/ANSI 55 Class A (when installed in the certified Pro20 system)
Electrical/ballast: Driven by Pro20 electronic ballast; system input 230–240 V AC, 50 Hz (NZ)
Operating conditions: Clear, prefiltered water; recommended pre-filter 5 µm; observe UVT/iron/tannin limits.
What’s included: Lamp only (quartz sleeve and O-rings sold separately)
Maintenance: Replace annually; reset controller after change; handle glass with gloves
Safety & disposal: Contains a small amount of mercury — recycle per NZ e-waste guidance
