Whole House Filter System

3 Stage Whole House Filter System for Town Water

Filtered water from every tap in your home. The system fits where the town water comes into your house, so your drinking water, showers, baths and appliances all get filtered water.

1st stage: Sediment reduction with an NSF certified dual gradient 25 to 1 micron filter.

2nd stage: Carbon filtration to reduce chlorine and its by-products, for better taste and smell.

3rd stage: KDF-55 media, which reduces some dissolved metals.

Rated up to 55 litres a minute and 80 PSI. If your water pressure is higher than 550 kPa, we fit a pressure limiting valve first.

Do you need the ioniser?

This is the exact same system as our Whole House Ioniser System, without the ioniser on the outlet, so it costs a lot less. In Orewa, Silverdale, Millwater and Milldale, water spotting is less of a problem, and many homes there just want the chlorine taste and smell gone.

If silica or calcium spots bother you, for example in Warkworth, Snells Beach or Algies Bay, read about our whole house ioniser.

Installation & warranty

We recommend a registered plumber installs the system. Our own registered plumbers do the site visit, quote and installation, so the system is set up correctly and the warranty is valid.

The filter housings shouldn’t sit in direct sun, so for an outside install, choose the galvanised cover above. Ask us if you’d prefer a plywood or plastic cover.

Fit the system somewhere easy to get to, like the garage, for the yearly filter change. We’ll remind you when it’s due.

The filter housings have a 24-month warranty.